THREE SEAT BELT TESTS
WARNINGS:
All occupants must wear seat belts, even for short drives. Failure to do so
increases the risk of death or serious injury in the event of a collision.
1.
With the seat belt fastened, give the webbing nearest the buckle a
quick pull. The buckle should remain securely locked.
Secure infants and small children in a rear seat using a suitable child
safety seat as described on page 9.
2.
With the belt unfastened, unreel the webbing to its limit. Check that
unreeling is free from snags and visually check the webbing for wear.
Allow the webbing to retract, checking that retraction is smooth and
complete.
Regularly check the condition of all seat belts. Replace belts if you notice
any damage to the webbing, fittings, retractor mechanisms or buckles.
Seat belts should be worn low across the pelvis, over the shoulder and
across the chest. Avoid wearing the lap section of the belt across the
abdominal area. Always adjust the belt to remove slack. Seat belts worn too
loose allow excessive forward movement in a collision. Seat belts should
not be worn with any part of the strap twisted. An improperly worn seat belt
increases the risk of serious injury or death in the event of a collision.
3.
With the webbing half unreeled, hold the tongue plate and pull forward
quickly. The mechanism should lock automatically and prevent further
unreeling.
If a seat belt fails any of these tests, contact Tesla immediately.
Do not wear seat belts over hard, fragile or sharp items in clothing, such as
pens, keys, eyeglasses, etc. In a collision, the pressure from the seat belt
can cause them to break, which in turn can cause injury.
HEAD SUPPORTS
Model S seats include integrated head supports that cannot be adjusted or
removed.
Each seat belt assembly must only be used by one occupant; it is
dangerous to put a belt around a child being carried on an occupant’s lap.
Seat belts that have been worn in an accident must be replaced, even if
damage is not obvious. The belt anchors must also be checked.
Avoid contaminating any component of a seat belt assembly with
chemicals, liquids, grit, dirt or cleaning products.
If a seat belt fails to retract or latch into the buckle, immediately contact
Tesla to have it replaced.
7
| Categories | Tesla, Tesla Model S |
|---|---|
| Download File |
|
| Document Type | Safety Information |
| Language | English |
| Product Brand | Tesla, Model S |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)