2013 Hyundai Elantra Owners Manual

Maintenance
3.
4.
Check the removed fuse; replace it if it
is blown. To remove or insert  the fuse,
use the fuse puller  in the engine com-
partment fuse panel.
Push in a new fuse of the same rating,
and make sure it fits tightly in the clips.
If it  fits loosely,  consult an  authorized
HYUNDAI dealer.
CAUTION
After checking the fuse panel in the
engine
compartment,
securely
OMD070021
OMD070022
install the  fuse  panel cover.  If not,
electrical  failures  may  occur  from
water contact.
Main fuse
If  the  main  fuse  is  blown,   it  must  be
removed as follows:
Multi fuse
If  the  multi  fuse  is   blown,  it  must  be
removed as follows:
1.
2.
Turn off the engine.
Disconnect the negative battery cable.
1. Remove the  fuse panel  in the engine
compartment.
3.
4.
5.
Remove the nuts shown  in the picture
above.
Replace the fuse with a new one of the
same rating.
Reinstall   in   the    reverse   order   of
removal.
2. Remove the nuts shown  in the picture
above.
3. Replace the fuse with a new one of the
same rating.
4. Reinstall   in   the   reverse    order   of
removal.
NOTICE
If the main or  multi fuse is blown, con-
sult an authorized HYUNDAI dealer.
7
52
Product Specification
Categories Hyundai Manuals, Hyundai Elantra Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 383 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Elantra
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field