Features of your vehicle
REARVIEW CAMERA (IF EQUIPPED)
HAZARD WARNING FLASHER
The rearview camera will activate when
the back-up light is ON with the ignition
switch ON and the shift lever in the R
WARNING
•
This system is a supplementary
function only. It is the responsi-
bility of the driver to always check
the inside/outside rearview mirror
and the area behind the vehicle
before and while backing up
because there is a dead zone that
can't see through the camera.
(Reverse) position.
This system is a supplemental system
that shows behind the vehicle through
the rearview display while backing-up.
The rearview camera may be turned off
by pressing the ON/OFF button when the
rearview camera is activated.
•
Always keep the camera lens
clean. If lens is covered with for-
eign matter, the camera may not
operate normally.
To turn the camera on again, press the
ON/OFF button again when the ignition
switch is on and the shift lever in R
(Reverse). Also, the camera will turn on
OPB042058
D180000AHM
The hazard warning flasher should be
used whenever you find it necessary to
stop the vehicle in a hazardous location.
automatically whenever the ignition
switch is turned off and on again.
✽
NOTICE
The rearview camera may not operate When you must make such an emer-
normally, when you drive in the gency stop, always pull off the road as
extremely high or low temperature far as possible.
area.
The hazard warning lights are turned on
(operating temperature: -20°C~65°C by pushing in the hazard switch. Both
(-4°F
~ 149°F))
turn signal lights will blink. The hazard
warning lights will operate even though
the key is not in the ignition switch.
To turn the hazard warning lights off,
push the switch again.
4
69
| Categories | Hyundai Manuals, Hyundai i20 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i20 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)