Features of your vehicle
CAUTION
CAUTION
When the ignition switch is ON and
the windshield wiper switch is
placed in the AUTO mode, use cau-
tion in the following situations to
avoid any injury to the hands or
other parts of the body:
When washing the vehicle, set the
wiper switch in the off position to
stop the auto wiper operation.
The wiper may operate and be dam-
aged if the switch is set in the
AUTO mode while washing the
vehicle.
•
Do not touch the upper end of the
windshield glass facing the rain
sensor.
Do not remove the sensor cover
located on the upper end of the pas-
Rain sensor
OEL049900
•
Do not wipe the upper end of the
windshield glass with a damp or
wet cloth.
senger
side
windshield
glass.
Damage to system parts could
occur and may not be covered by
your vehicle warranty.
AUTO (Automatic) control
(if equipped)
• Do not put pressure on the wind-
shield glass.
When starting the vehicle in winter,
set the wiper switch in the off posi-
tion. Otherwise, wipers may oper-
ate and ice may damage the wind-
shield wiper blades. Always remove
all snow and ice and defrost the
windshield properly prior to operat-
The rain sensor located on the upper end
of the windshield glass senses the
amount of rainfall and controls the wiping
cycle for the proper interval. The more it
rains, the faster the wiper operates.
When the rain stops, the wiper stops.
To vary the speed setting, turn the speed
control knob (1).
If the wiper switch is set in AUTO mode
when the ignition switch is ON, the wiper
will operate once to perform a self-check
of the system. Set the wiper to off posi-
tion when the wiper is not in use.
4
76
| Categories | Hyundai Manuals, Hyundai i20 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i20 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)