Features of your vehicle
To adjust the Zone setting:
1.
2.
Press and hold the
button for more
WARNING
1.
2.
3.
Determine the desired Zone Number
based upon your current location on
the Zone Map.
than 9 seconds. When the compass
memory is cleared a "C" will appear in
the display.
Before programming HomeLink® to
a garage door opener or gate oper-
ator, make sure that people and
objects are out of the way of the
device to prevent potential harm or
Press and hold the
button for 6 sec-
To calibrate the compass, drive the
vehicle in 2 complete circles at less
than 5 mph (8 km/h).
onds, the current Zone Number will
appear on the display.
damage. Do not use HomeLink
®
Pressing and holding the
button
with any garage door opener that
lacks the safety stop and reverse
features required by U.S. federal
safety standards (this includes any
garage door opener model manu-
factured before April 1, 1982). A
garage door that cannot detect an
object - signaling the door to stop
and reverse - does not meet current
U.S. federal safety standards. Using
a garage door opener without these
features increases the risk of seri-
ous injury or death.
again will cause the numbers to incre-
ment (Note: they will repeat …13, 14,
Integrated HomeLink® Wireless Control
System
The HomeLink Wireless Control System
®
15,
1, 2, …). Releasing the button
when
the desired Zone Number
provides a convenient way to replace up
to three hand-held radio-frequency (RF)
transmitters with a single built-in device.
This innovative feature will learn the
radio frequency codes of most current
transmitters to operate devices such as
gate operators, garage door openers,
entry door locks, security systems, even
home lighting. Both standard and rolling
code-equipped transmitters can be pro-
grammed by following the outlined proce-
appears on the display will set the new
Zone.
4.
Within about 5 seconds the compass
will start displaying a compass head-
ing again.
There are some conditions that can
cause changes to the vehicle magnets,
such as installing a ski rack or a CB
antenna. Body repair work on the vehicle
can also cause changes to the vehicle's
magnetic field. In these situations, the
compass will need to be re-calibrated to
quickly correct for these changes. To re-
calibrate the compass:
dures. Additional HomeLink
®
information
Retain the original transmitter of the RF
device you are programming for use in
other vehicles as well as for future
HomeLink® programming. It is also sug-
gested that upon the sale of the vehicle,
can be found at: www.homelink.com or
by calling 1-800-355-3515.
the programmed HomeLink buttons be
®
erased for security purposes.
4
44
| Categories | Hyundai Manuals, Hyundai Sonata Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Sonata |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)