Safety system of your vehicle
E2MS103005
OEN036101
OEN036104
Installing a child restraint system by
lap/shoulder belt
2. Fasten the lap/shoulder belt latch into
the buckle. Listen for the distinct “click”
sound.
Position the release button so that it is
easy to access in case of an emergency.
3. Buckle the seat belt and allow the seat
belt to take up any slack. After installa-
tion of the child restraint system, try to
move it in all directions to be sure the
child restraint system is securely
installed.
If you need to tighten the belt, pull more
webbing toward the retractor. When you
unbuckle the seat belt and allow it to
retract, the retractor will automatically
revert back to its normal seated passen-
ger emergency locking usage condition.
To install a child restraint system on the
outboard or center rear seats, do the fol-
lowing:
1.
Place the child restraint system in the
seat and route the lap/shoulder belt
around or through the restraint, follow-
manufacturer’s
instructions. Be sure the seat belt web-
bing is not twisted.
ing
the
restraint
WARNING
When using the rear center seat
belt, you should also refer to “3
point rear center seat belt” in this
chapter.
3
35
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)