Safety system of your vehicle
SRS components and functions
The SRS consists of the following com-
ponents:
The SRSCM continually monitors all ele-
ments while the ignition switch is ON to
determine if a frontal, near-frontal impact
or side impact is severe enough to
require air bag deployment or pre-ten-
sioner seat belt deployment.
Driver’s front air bag (1)
1.
2.
3.
4.
5.
6.
7.
8.
9.
Driver's front air bag module*
Front impact sensors*
Passenger's front air bag module*
Retractor pre-tensioner assemblies*
Side impact sensors*
Curtain air bag modules*
Side air bag modules*
SRS control module (SRSCM)
Air bag warning light
The SRS air bag warning light on the
instrument panel will illuminate for about
6 seconds after the ignition switch is
turned to the ON position, after which the
air bag warning light should go out.
B240B01L
The front air bag modules are located
both in the center of the steering wheel
and in the front passenger's panel above
the glove box. When the SRSCM detects
a sufficiently severe impact to the front of
the vehicle, it will automatically deploy
the front air bags.
10.
Passenger’s front air bag ON/OFF
switch*
Passenger’s front air bag ON/OFF
indicator*
WARNING
If any of the following conditions
occurs, this indicates a malfunction
of the SRS. Have an authorized
HYUNDAI dealer inspect the air bag
system as soon as possible.
The light does not turn on briefly
when you turn the ignition ON.
The light stays on after illuminat-
ing for approximately 6 seconds.
The light comes on while the
vehicle is in motion.
11.
*:
if equipped
•
•
•
•
The light blinks when the ignition
switch is in ON position.
3
44
Product Specification
Categories | Hyundai Manuals, Hyundai Tucson Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Tucson |
Document File Type | |
Copyright | Attribution Non-commercial |