(FM8) SEMCON LAND ROVER OWNER GUIDE VER 1.00 EURO
LANGUAGE: english-en; MARQUE: landrover; MODEL: L319
R
Wheel changing
LOCKING WHEEL NUTS
Locking wheel nuts can only be removed and
installed using the special adapter provided in
the tool kit.
3. Position the jack under the relevant jacking
point. For coil suspension vehicles this is
located on the lower suspension arm, for
air suspension vehicles this is under the
chassis. Refer to the correct diagram
above for your vehicle.
Note: A code number is stamped onto the
underside of the adapter. This number should
be recorded on the security card supplied with
the literature pack. If a replacement adapter is
required, you will be asked to quote this
number. The security card must be kept safe,
but should not be kept with the vehicle.
4.
Turn the jack lever clockwise to raise the
jack cradle until it engages with the jacking
point. Ensure that the base of the jack is in
full contact with the road surface.
5. Raise the vehicle using the jack with a slow
steady operation. Avoid rapid, jerky actions
as they may cause the vehicle/jack to
become unstable.
6.
Remove the wheel nuts and place them
together where they cannot roll away.
7.
Remove the wheel and place to one side.
Do not lay the wheel on its face, as this may
damage the finish.
8.
9.
Fit the spare wheel to the hub.
Re-fit the wheel nuts, and lightly tighten
them. Ensure that the wheel is making
contact with the hub evenly.
10.
11.
Ensure that the space under the vehicle is
clear of obstructions, and lower the vehicle
slowly and smoothly.
To release:
1.
Insert the wheel nut adapter into the
locking wheel nut, ensuring that it is fully
engaged.
With all wheels on the ground and the jack
removed, fully tighten the wheel nuts. The
wheel nuts must be tightened in sequence
(see illustration) to the correct torque of
2.
Use the wheel brace to turn the wheel nut
and adapter.
133
Nm (98 lb.ft).
Note: After use store the wheel nut adapter
correctly in the tool kit.
WHEEL CHANGING
1.
Read and observe the WARNINGS before
changing a wheel, see 219, WHEEL
CHANGING SAFETY.
2.
Before rasing the vehicle, use the wheel nut
brace to slacken the wheel nuts half a turn
anticlockwise.
225
| Categories | Land Rover, Land Rover Discovery 4 |
|---|---|
| Tags | Land Rover |
| Model Year | 2014, 2015 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Discovery 4 Handbook |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2014-2015 Land Rover Discovery 4 Handbook Manual 5.0 out of 5.0 based on 1 product reviews. This website is really Great1!