What to do in an emergency
Distributing the sealant
Immediately drive approximately
(7~10km or, about
to evenly distribute the
sealant in the tire.
Do not exceed a speed of 50 mph
Checking the tire inflation pres- ✽ NOTICE
sure
11.
The pressure gauge may show high-
er than actual reading when the
compressor is running. To get an
accurate tire pressure, the compres-
1.
2.
3.
After
driving
approximately
4~6miles
4~6miles
(7~10km or about
10min)
10min),
Connect connection hose (9) of sor needs to be turned off.
the compressor directly to the tire
valve.
Plug the compressor power cord
into the vehicle power outlet.
stop at a safety location.
(80
km/h). If possible, do not fall
below a speed of 12 mph (20 km/h).
While driving, if you experience any
unusual vibration, ride disturbance or
noise, reduce your speed and drive 4. Adjust the tire inflation pressure to
with caution until you can safely pull
off of the side of the road.
- To reduce the inflation pres-
sure: Loosen the screw cap (8)
on the compressor hose.
the recomended tire inflation.
With the ignition swithched on,
proceed as follows.
Call for road side service or towing.
When you use the Tire Mobility Kit,
the tire pressure sensors and wheel
may be damaged by sealant, remove
the sealant stained with tire pressure
sensors and wheel and inspect in
authorized dealer.
- To increase the inflation pres-
sure : Switch on the compres-
sor, position I. To check the cur-
rent inflation pressure setting,
briefly switch off the compressor.
6
29
Product Specification
Categories | Hyundai Manuals, Hyundai Accent Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Accent |
Document File Type | |
Copyright | Attribution Non-commercial |