Features of your vehicle
Turn signals and lane change
signals
If an indicator stays on and does not Front fog light (if equipped)
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned
out and will require replacement.
One-touch lane change function
(if equipped)
To
activate an one-touch lane
change function, move the turn sig-
nal lever slightly and then release it.
The lane change signals will blink 3
times.
ODMECO2015
ODMECO2026
✽ NOTICE
Fog lights are used to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc.
The ignition switch must be on for the
turn signals to function. To turn on
the turn signals, move the lever up or
down (A). Green arrow indicators on
the instrument panel indicate which
turn signal is operating.
They will self-cancel after a turn is
completed. If the indicator continues
to flash after a turn, manually return
the lever to the OFF position.
If an indicator flash is abnormally
quick or slow, bulb may be burned
out or have a poor electrical connec- 1. Turn on the park light.
tion in the circuit.
2.
Turn the light switch (1) to the front
fog light position.
3.
To turn off the front fog light, turn
the light switch to the front fog light
position again or turn off the park
light.
To signal a lane change, move the
turn signal lever slightly and hold it in
position (B). The lever will return to
the OFF position when released.
4
128
| Categories | Hyundai Manuals, Hyundai Grand Santa Fe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Santa Fe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)