Features of your vehicle
Windshield wipers
Auto control (if equipped)
CAUTION
Operates as follows when the igni-
tion switch is turned ON.
When the ignition switch is ON
and the windshield wiper switch
is placed in the AUTO mode, use
caution in the following situa-
tions to avoid any injury to the
hands or other parts of the body:
Do not touch the upper end of
the windshield glass facing
the rain sensor.
Do not wipe the upper end of
the windshield glass with a
damp or wet cloth.
Do not put pressure on the
windshield glass.
/
MIST : For a single wiping cycle,
move the lever to this
(
/ MIST) position and
release it. The wipers will
operate continuously if
the lever is held in this
position.
•
•
•
O / OFF : Wiper is not in operation
Rain sensor
---
/ INT : Wiper operates intermittently
at the same wiping intervals.
ODMECO2022
Use this mode in light rain or The rain sensor located on the upper
mist. To vary the speed setting, end of the windshield glass senses
the amount of rainfall and controls
the wiping cycle for the proper inter-
val. The more it rains, the faster the
wiper operates.
turn the speed control knob.
/ LO : Normal wiper speed
/ HI : Fast wiper speed
1
2
When the rain stops, the wiper stops.
To vary the speed setting, turn the
✽ NOTICE
If there is heavy accumulation of speed control knob (1).
snow or ice on the windshield, defrost
the windshield for about 10 minutes,
or until the snow and/or ice is
removed before using the windshield
wipers to ensure proper operation.
If the wiper switch is set in AUTO
mode when the ignition switch is ON,
the wiper will operate once to per-
form a self-check of the system. Set
the wiper to OFF position when the
wiper is not in use.
4
133
| Categories | Hyundai Manuals, Hyundai Grand Santa Fe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Santa Fe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)