2014 Hyundai Santa Fe Owners Manual

Safety features of your vehicle
NOTICE
To raise the  height adjuster, pull it up
Front seat
(1).
To lower it, push it  down (3) while
If  you are  not  able to  pull  out  the
seat  belt from  the  retractor, firmly
pull the belt out and release it. Then
you will  be able to  pull the  belt out
smoothly.
pressing the height adjuster button (2).
Release   the   button    to   lock   the
anchor  into position.  Try sliding  the
height adjuster   to make  sure that it
has locked into position.
WARNING
Verify
the
shoulder
belt
anchor is locked into position
at   the    appropriate    height.
Never  position   the  shoulder
belt across your neck  or face.
Improperly   positioned    seat
OCM030026
Height adjustment
You can adjust the height of the shoul-
der belt  anchor to one of  4 positions
for maximum comfort and safety.
If  the height  of  the seat  belt  is too
near your  neck, you  will not be  get-
ting  the   most  effective   protection.
The   shoulder   portion    should   be
adjusted  so that  it  lies  across your
chest and midway over your shoulder
nearest the door and not your neck.
belts
injuries in an accident.
can
cause
serious
Failure  to  replace  seat  belts
after an  accident  could leave
you  with damaged  seat belts
that  will  not  provide  protec-
tion  in  the  event  of  another
collision  leading  to  personal
injury or death.   Replace your
seat  belts  after   being  in  an
accident as soon as possible.
To adjust  the height of  the seat  belt
anchor,  lower   or  raise   the  height
adjuster into an appropriate position.
3
29
Product Specification
Categories Hyundai Manuals, Hyundai Santa Fe Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 711 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Santa Fe
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field