What to do in an emergency
Wheel nut tightening torque:
Steel wheel & aluminium alloy wheel:
CAUTION
Your vehicle has metric threads
on the wheel studs and nuts.
9~11
kg.m (65~79 lb.ft)
Make
certain
during
wheel
If you have a tire gauge, remove the
valve cap and check the air pressure.
If the pressure is lower than recom-
mended, drive slowly to the nearest
service station and inflate to the cor-
rect pressure. If it is too high, adjust
it until it is correct. Always reinstall
the valve cap after checking or
adjusting tire pressure. If the cap is
not replaced, air may leak from the
tire. If you lose a valve cap, buy
another and install it as soon as pos-
sible.
removal that the same nuts that
were removed are reinstalled -
or, if replaced, that nuts with
metric threads and the same
chamfer configuration are used.
Installation of a non-metric
thread nut on a metric stud or
vice-versa will not secure the
wheel to the hub properly and
will damage the stud so that it
must be replaced.
ODM062011
Then position the wrench as shown
in the drawing and tighten the wheel
nuts. Be sure the socket is seated
completely over the nut. Do not stand
on the wrench handle or use an
extension pipe over the wrench han-
dle.
Go around the wheel tightening
every other nut until they are all tight.
Then double-check each nut for
tightness. After changing wheels, we
recommend that the system be
checked by an authorized HYUNDAI
dealer.
Note that most lug nuts do not
have metric threads. Be sure to
use extreme care in checking
for thread style before installing
aftermarket lug nuts or wheels.
If in doubt, we recommend that
After you have changed wheels,
always secure the flat tire in its place
and return the jack and tools to their
proper storage locations.
you
consult
an
authorized
HYUNDAI dealer.
6
19
Product Specification
Categories | Hyundai Manuals, Hyundai Santa Fe Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Santa Fe |
Document File Type | |
Copyright | Attribution Non-commercial |