2014 Hyundai Sonata Owners Manual

Features of your vehicle
To adjust the Zone setting:
1.
2.
Press and hold the
button for more
WARNING
1.
2.
3.
Determine  the desired  Zone  Number
based  upon your  current  location  on
the Zone Map.
than 9  seconds.   When the  compass
memory is cleared a "C" will appear in
the display.
Before programming  HomeLink® to
a garage door opener or  gate oper-
ator,  make  sure   that  people  and
objects  are  out of  the  way  of  the
device to prevent potential harm  or
Press and hold the
button for 6 sec-
To  calibrate  the  compass,  drive   the
vehicle  in  2 complete  circles  at  less
than 5 mph (8 km/h).
onds,  the  current  Zone  Number  will
appear on the display.
damage.   Do  not   use  HomeLink
®
Pressing  and  holding  the
button
with  any garage  door  opener  that
lacks  the  safety stop  and  reverse
features  required   by  U.S.  federal
safety standards (this  includes any
garage  door  opener model  manu-
factured  before   April  1,  1982).  A
garage door  that cannot  detect an
object -  signaling the  door to stop
and reverse - does not meet current
U.S. federal safety standards. Using
a garage door opener without these
features increases  the risk  of seri-
ous injury or death.
again will cause the numbers  to incre-
ment (Note: they  will repeat …13,  14,
Integrated HomeLink® Wireless Control
System
The HomeLink  Wireless Control System
®
15,
1,  2,  …).  Releasing   the  button
when
the   desired    Zone    Number
provides a convenient way  to replace up
to three  hand-held radio-frequency  (RF)
transmitters with  a single built-in  device.
This  innovative   feature  will   learn   the
radio  frequency  codes  of  most  current
transmitters to  operate devices  such as
gate  operators,   garage  door  openers,
entry door  locks, security systems, even
home lighting. Both  standard and rolling
code-equipped transmitters  can  be pro-
grammed by following the outlined proce-
appears on the display will set the new
Zone.
4.
Within about  5 seconds  the compass
will start  displaying  a compass  head-
ing again.
There   are  some   conditions   that  can
cause changes  to  the vehicle  magnets,
such  as  installing  a  ski  rack  or  a  CB
antenna. Body repair work on the vehicle
can also cause  changes to the  vehicle's
magnetic  field.   In these  situations,  the
compass will need  to be re-calibrated  to
quickly correct  for these changes. To re-
calibrate the compass:
dures. Additional HomeLink
®
information
Retain the  original transmitter of  the RF
device  you are  programming  for use  in
other   vehicles   as  well   as   for  future
HomeLink® programming.   It is also sug-
gested that upon  the sale of the vehicle,
can  be found  at:  www.homelink.com or
by calling 1-800-355-3515.
the  programmed HomeLink   buttons  be
®
erased for security purposes.
4
44
Product Specification
Categories Hyundai Manuals, Hyundai Sonata Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 410 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Sonata
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field