2014 Hyundai Sonata Owners Manual

Specifications, Consumer information, Reporting safety defects
Recommended SAE viscosity
number
Engine  oil  viscosity  (thickness) has  an
effect on fuel economy and cold weather
operating  (engine  start  and  engine   oil
flowability).  Lower  viscosity  engine  oils
can provide better fuel economy and cold
weather  performance,   however,  higher
viscosity engine oils are required for  sat-
isfactory lubrication in hot weather. Using
oils of any viscosity other than those rec-
ommended could  result  in engine  dam-
age.
When choosing an oil, consider the range
of temperature your  vehicle will be  oper-
ated   in  before   the   next   oil  change.
Proceed  to select  the recommended  oil
viscosity from the chart.
CAUTION
Always  be  sure  to  clean  the area
around any filler plug, drain plug, or
dipstick  before  checking or  drain-
ing any lubricant. This is  especially
important  in dusty  or sandy  areas
and  when  the  vehicle  is  used  on
unpaved  roads. Cleaning  the  plug
and dipstick  areas will  prevent dirt
and  grit  from  entering  the  engine
and  other  mechanisms  that  could
be damaged.
Temperature Range for SAE Viscosity Numbers
-30
-20
-10
-10
0
10
20
30
40
50
Temperature    (°C°F)
0
20
40
60
80
100
120
Engine Oil
(2.0 TGDI)
5W-30, 5W-40
Engine Oil
10W-30
(2.4 GDI) *
1
5W-20, 5W-30
*1.
For better fuel economy,  it is recommended to use  the engine oil
of a viscosity grade SAE 5W-20 (API SM / ILSAC GF-4). However,
if the engine oil  is not available in your  country, select the proper
engine oil using the engine oil viscosity  chart.
8
5
Product Specification
Categories Hyundai Manuals, Hyundai Sonata Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 410 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Sonata
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field