Tesla Built In Rear Facing Child Seats
Usage Restrictions
3. Undo the Velcro strap:
Tesla Built In Rear Facing Child Seats
The Tesla built in rear facing child seats are child
restraint systems and are approved to United
Nations ECE Regulation R44.04 standards for
use by children in Mass Groups II and III,
weighing 15 - 36 kg. These seats must only be
used for children who are between 3 and 12
years old, and 98 - 135 cm tall.
Always ensure the top of the child’s head
cannot contact the vehicle and that the child is
seated comfortably with the seat belts
positioned and latched correctly. The child’s
pelvis must be held securely in place by the lap
belt. Follow all instructions provided and do
not use supplemental child safety seats in
these seats.
4. Pull the handle to release the head supports
from the seat back, then pull the head
supports toward you to unfold them:
NOTE: To draw more air into the rear seating
areas, it is recommended that whenever a child
is seated in the Tesla built in rear facing child
seats, you set the climate control system to
draw outside air into Model S, instead of
recirculating the air. See page 5.9.
Opening
1.
Remove the cover from the trunk floor and
pull the strap to lift the seat assembly
upward:
5.
Raise the seat back to the upright position
and push until it locks into position. Visually
check to ensure that the retaining catches
are engaged:
2.
Push the seat assembly into position:
6.
Check that the seat back and seat base are
securely retained in the upright position by
trying to pull the seat back toward you.
SEATING AND SAFETY RESTRAINTS
3.11
| Categories | Tesla, Tesla Model S |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Tesla, Model S |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)