Maintenance
8.
Install the socket in the assembly Back up light
Turn signal
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
5.
Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
6.
7.
Remove the bulb by pulling it out.
Inset a new bulb by inserting it into
the socket.
Back up
8.
Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
OBK072063
Turn signal light
5.
Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
Tail light, Stop and tail light (LED),
Side marker (LED)
If the light is not operating, we rec-
6.
ommend
that you checked an
authorized HYUNDAI dealer.
7.
Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
7
73
| Categories | Hyundai Manuals, Hyundai Genesis, Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Genesis |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)