Maintenance
Battery capacity label
Battery recharging
CAUTION
Your vehicle has a maintenance-free,
calcium-based battery.
■
Example
For the vehicle equipped with
ISG system (AGM battery), be
careful not to damage the bat-
tery sensor when the battery is
replaced or recharged.
•
If the battery becomes discharged
in a short time (because, for exam-
ple, the headlights or interior lights
were left on while the vehicle was
not in use), recharge it by slow
charging (trickle) for 10 hours.
1)
When replacing the battery, it
should be same one (type,
capacity and brand) that is
originally installed on your
vehicle. If a battery of a dif-
ferent type is replaced, bat-
tery sensor may recognize
the battery to be abnormal.
•
If the battery gradually discharges
because of high electric load while
the vehicle is being used, recharge
it at 20-30A for two hours.
OEU074074
❈
The actual battery label in the vehicle
may differ from the illustration.
2)
When installing the ground
cable on the negative post of
battery, tighten the clamp
with specified torque of 4.0 ~
1.
CMF100L-DIN : The HYUNDAI
model name of battery
2.
3.
12V : The nominal voltage
6.0
N.m (0.4 ~ 0.6 kgf.m, 3.0 ~
100Ah(20HR) : The
nominal
(in
4.41 lb-ft). An excessive tight-
ening torque can damage the
PCB internal circuit.
capacity
Ampere hours)
4.
5.
6.
190RC : The
nominal
capacity (in min.)
reserve
3) When recharging the battery,
ground the negative terminal
of the booster battery to the
vehicle body.
780CCA (SAE) :The cold-test cur-
rent in amperes by SAE
625A (EN) : The cold-test current
in amperes by EN
7-40
| Categories | Hyundai Manuals, Hyundai h350 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, H350 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)