Maintenance
Turn signal light/Position light
Turn signal light
Front fog light bulbs
(if equipped)
Headlight and front fog light
aiming (for Europe)
1.Remove
cover.
the front bumper under
1.Turn
hood.
off the engine and open the
Headlight aiming
■
MFR type
2.Reach your hand into the back of
the front bumper.
2.Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on 3.Disconnect the power connector
the socket align with the slots on
the assembly.
from the socket.
4.Remove
the bulb-socket from the
3.Remove
the bulb from the socket
housing by turning the socket
counter clockwise until the tabs on
the socket align with the slots on
the housing.
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket
OEU074049
5.Install
the new bulb-socket into the
■ Projection type
housing by aligning the tabs on the
socket with the slots in the hous-
ing. Push the socket into the hous-
ing and turn the socket clockwise.
4.Insert
a new bulb by inserting it into
the socket and rotating it until it
locks into place.
5.Install
the socket in the assembly 6.Connect the power connector to
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
the socket.
7.Reinstall
cover.
the front bumper under
OEU074061
1.Inflate
the tires to the specified
Position light
pressure and remove any loads
from the vehicle except the driver,
spare tire, and tools.
If the light bulb does not operate, we
recommend that the system be
checked by an authorized HYUNDAI
dealer.
7-70
| Categories | Hyundai Manuals, Hyundai h350 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, H350 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)