Maintenance
7.
8.
Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
Install the service cover by putting it
into the service hole.
Back-up light (Bulb type)
4. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
5. Pull the bulb out of the socket.
6.
7.
Insert a new bulb into the socket.
TTaaiill
Install the socket into the assembly by
aligning the tabs on the socket with the
slots on the assembly and turning the
socket clockwise.
BBaacckk--uupp lliigghhtt
8.
Reinstall the light assembly to the
body of the vehicle
OGD071035
Tail light (Bulb type)
4.
Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
Stop/tail light and Stop light (LED type )
If the light does not operate, we recom-
mend that the system be checked by an
authorized HYUNDAI dealer.
5.
6.
Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
7
85
| Categories | Hyundai Manuals, Hyundai i30 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i30 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)