Features of your vehicle
Using the transmitter (if equipped) Using the mechanical key
Do not arm the system until all
passengers have left the vehicle. If
the system is armed while a pas-
senger(s) remains in the vehicle,
the alarm may be activated when
the remaining passenger(s) leave
the vehicle. If any door (or trunk)
or engine hood is opened within
Park the vehicle and stop the engine. Park the vehicle and stop the engine.
Arm the system as described below.
Arm the system as described below.
1.
2.
3.
Turn off the engine and remove 1. Turn off the engine and remove
the ignition key from the ignition the key from the ignition switch(if
switch. equipped).
Make sure that all doors, the 2. Make sure that all doors, the
engine hood and tailgate are
closed and latched.
engine hood and tailgate are
closed and latched.
30
seconds after the system
enters the armed stage, the sys-
Lock the doors by pressing the 3. Lock the doors by inserting the key tem is disarmed to prevent an
lock button on the transmitter.
into the key hole on the front out- unnecessary alarm.
side door handle and turning the
key toward the front of the vehicle.
After completion of the steps above,
the hazard warning lights will blink
once to indicate that the system is If any door, tailgate or engine hood
armed.
If any door, tailgate or engine hood
remains open, the hazard warning
lights won't operate and theft-alarm
will not arm. After you close all doors,
tailgate and engine hood, the hazard
warning lights blink once.
remains open, the theft-alarm will not
arm.
✽
NOTICE
If you lock or unlock the doors by
using the mechanical key, the haz-
ard warning light won't operate.
4
18
Product Specification
Categories | Hyundai Manuals, Hyundai Elantra Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Elantra |
Document File Type | |
Copyright | Attribution Non-commercial |