Maintenance
Recommended engine coolant
For mixture percentage, refer to the
following table.
•
When adding coolant, use only
deionized water or soft water for
your vehicle and never mix hard
water in the coolant filled at the fac-
tory. An improper coolant mixture
can result in serious malfunction or
engine damage.
Mixture Percentage (volume)
Ambient
Temperature
Antifreeze
Water
5°F (-15°C)
-13°F (-25°C)
-31°F (-35°C)
-49°F (-45°C)
35
40
50
60
65
60
50
40
•
The engine in your vehicle has alu-
minum engine parts and must be
protected by an ethylene-glycol
with phosphate based coolant to
prevent corrosion and freezing.
OGD071007
Check the condition and connections
of all cooling system hoses and
heater hoses. Replace any swollen
or deteriorated hoses.
The coolant level should be filled
between F and L marks on the side
of the coolant reservoir when the
engine is cool.
If the coolant level is low, add enough
distilled (deionized) water. Bring the
level to F, but do not overfill. If fre-
quent additions are required, see an
authorized HYUNDAI dealer for a
cooling system inspection.
•
•
DO NOT USE alcohol or methanol
coolant or mix them with the spec-
ified coolant.
Do not use a solution that contains
more than 60% antifreeze or less
than 35% antifreeze, which would
reduce the effectiveness of the
solution.
7
30
Product Specification
Categories | Hyundai Manuals, Hyundai Elantra Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Elantra |
Document File Type | |
Copyright | Attribution Non-commercial |