2016 Hyundai Genesis Coupe Owners Manual

Features of your vehicle
4.
Firmly  press,  hold  for  5 seconds      6. Firmly   press   and   release   the      Gate operator & Canadian
and    release   the    programmed         "leam"   or   "smart"   button.  (The     programming
HomeLink® button up to two  sepa-
name and color of  the button vary     During programming,  your handheld
rate times to activate the door. If the
door does  not activate,  press and
by  manufacturer).  There   are  30     transmitter  may   automatically  stop
seconds to initiate step 7.
transmitting.    Continue
to
press
hold  the   just-trained  HomeLink®     7. Return  to  the  vehicle  and  firmly     the  Integrated  HomeLink®  Wireless
button  and  observe  the  indicator
light.
press,
hold
for
2
seconds
Control  System  button  (note  steps
2    through    4    in   the    Standard
and   release    the    programmed
If the indicator light stays on con-
stantly, programming is complete
HomeLink ®  button.   Repeat   the     Programming  portion  of  this  docu-
"press/hold/release"  sequence   a     ment)  while you press  and re-press
second  time,  and,  depending on     ("cycle")   your  handheld  transmitter
the   brand  of   the   garage   door     every two seconds until  the frequen-
opener   (or   other    rolling   code     cy signal has been learned. The indi-
equipped    device),   repeat    this     cator  light will  flash slowly  and then
sequence a third time to  complete     rapidly  after  several  seconds  upon
and your  device should  activate
when  the  HomeLink®  button is
pressed and released.
If the  indicator light blinks  rapidly
for 2  seconds  and then  turns to
a  constant   light,  continue   with
"Programming" steps 5-7 to com-
the programming process.
successful training.
plete the programming of a rolling     HomeLink® should now activate your     Operating HomeLink®
code equipped device (most com-    rolling  code equipped device.
monly a garage door opener).
To operate, simply press and release
the programmed  HomeLink® button.
5.
At the garage door  opener receiv-
er (motor-head unit) in the garage,
locate  the "leam"  or  "smart"  but-
ton.  This  can   usually  be   found
where the hanging antenna wire is
attached to the motor-head unit.
Activation   will  now   occur   for  the
trained device (i.e. garage door open-
er,  gate  operator,   security  system,
entry door  lock, home/office lighting,
etc.). For convenience, the hand-held
transmitter of the device may also be
used at any time.
4
41
Product Specification
Categories Hyundai Manuals, Hyundai Genesis Coupe Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 475 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Genesis Coupe
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field