What to do in an emergency
ROAD WARNING
IN CASE OF AN EMER-
GENCY WHILE DRIVING
If the engine stalls at a cross-
road or crossing
It should be used whenever emer-
gency repairs are being made or
when the vehicle is stopped near the
edge of a roadway.
Depress the flasher switch with the
ignition switch in any position. The
flasher switch is located in the center
console switch panel. All turn signal
lights will flash simultaneously.
If the engine stalls at a crossroad or
crossing, set the shift lever in the N
(Neutral) position and then push the
vehicle to a safe place.
If you have a flat tire while
driving
•
The hazard warning flasher oper-
ates whether your vehicle is run- If a tire goes flat while you are driv-
ning or not.
OBK042044N
Hazard warning flasher
ing:
The hazard warning flasher serves • The turn signals do not work when 1.Take your foot off the accelerator
as a warning to other drivers to exer-
the hazard flasher is on.
pedal and let the car slow down
while driving straight ahead. Do not
apply the brakes immediately or
attempt to pull off the road as this
may cause a loss of control. When
the car has slowed to such a speed
that it is safe to do so, brake care-
fully and pull off the road. Drive off
the road as far as possible and
park on firm, level ground. If you
are on a divided highway, do not
park in the median area between
the two traffic lanes.
cise
extreme
caution
when
•
Care must be taken when using
the hazard warning flasher while
the vehicle is being towed.
approaching, overtaking, or passing
your vehicle.
6
2
| Categories | Hyundai Manuals, Hyundai Genesis Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Genesis Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)