Features of your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
WARNING - Windshield
heating
Do not use the
or
position
during cooling operation in extreme-
ly humid weather. The difference
between the temperature of the out-
side air and that of the windshield
could cause the outer surface of the
windshield to fog up, causing loss of
visibility. In this case, set the mode
selection knob or button to the
position and fan speed control knob
or button to the lower speed.
OTQ045268
OTQ045269
Manual climate control system
To defrost outside windshield
1.
Set the fan speed to the highest
(extreme right) position.
Set the temperature to the extreme hot
position.
To defog inside windshield
1. Select any fan speed except “0” posi-
tion.
•
For maximum defrosting, set the temper-
ature control to the extreme right/hot
position and the fan speed control to the
highest speed.
2.
2. Select desired temperature.
3. Select the
4. The outside (fresh) air and air condi-
tioning will be selected automatically.
position.
3.
Select the
or
position.
•
•
•
If warm air to the floor is desired while
defrosting or defogging, set the mode to
the floor-defrost position.
Before driving, clear all snow and ice
from the windshield, rear window, outside
rear view mirrors, and all side windows.
Clear all snow and ice from the hood and
air inlet in the cowl grill to improve heater
and defroster efficiency and to reduce the
probability of fogging up the inside of the
windshield.
4.
If the
side (fresh) air and air conditioning will
be selected automatically.
position is selected, the out-
If the air conditioning and outside (fresh)
air position are not selected automatically,
press the corresponding button manually.
4
100
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)