Maintenance
G201004AEN
G201006AUN
WARNING - Tire age
4.Tire ply composition and material
6. Maximum load rating
Tires degrade over time, even
The number of layers or plies of rub- This number indicates the maximum
ber-coated fabric in the tire. Tire load in kilograms and pounds that
manufacturers also must indicate the can be carried by the tire. When
materials in the tire, which include replacing the tires on the vehicle,
steel, nylon, polyester, and others. always use a tire that has the same
The letter "R" means radial ply con- load rating as the factory installed
when they are not being used.
Regardless of the remaining
tread, it is recommended that
tires generally be replaced after
six (6) years of normal service.
Heat caused by hot climates or
frequent high loading condi-
tions can accelerate the aging
process. Failure to follow this
warning can result in sudden
tire failure, which could lead to
a loss of control and an acci-
dent involving serious injury or
death.
struction; the letter "D" means diago-
nal or bias ply construction; and the
letter "B" means belted-bias ply con-
struction.
tire.
G2010007BEN
7. Uniform tire quality grading
Quality grades can be found where
applicable on the tire sidewall
between tread shoulder and maxi-
mum section width.
G201005AUN
5. Maximum permissible inflation
pressure
This number is the greatest amount
of air pressure that should be put in
the tire. Do not exceed the maximum
For example:
TREAD wear 200
permissible inflation pressure. Refer TRACTION AA
to the Tire and Loading Information
label for recommended inflation
pressure.
TEMPERATUE A
7
49
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)