DO-IT-YOURSELFMAINTENANCE 6-7
G040A03A-GAT
CHANGING THE OIL AND FILTER
The engine oil and filter should be changed at
those intervals specified in the maintenance
schedule in Section 5. If the car is being driven
in severe conditions, more frequent oil and filter
changes are required.
3.5
V6
2.4
DOHC
2.7 V6
The procedure for changing the oil and filter is
as follows:
1.
Park the car on level ground and set the
parking brake. Start the engine and let it
warm up until the needle on the coolant
temperature gauge moves above the lowest
mark. Turn the engine off and place the gear
selector lever in "P" (automatic) or reverse
gear (manual transaxle).
HSM426
If the oil level is close to or below the "L" mark,
add oil until it reaches the "F" mark. To add oil:
HSM394
2.
3.
Open the hood and remove the engine oil
filler cap.
3.5 V6
1.
2.
3.
Removetheoilfillercapbyturningitcounter-
clockwise.
Add oil, then check the level again. Do not
overfill.
Slide underneath the car and loosen the
drain plug by turning it counterclockwise with
a wrench of the proper size. Be sure that a
drain pan is in position to catch the oil as it
drains out, then remove the drain plug.
Replace the cap by turning it clockwise.
The distance between the "F" and "L" marks is
equal to about 1 quart of oil.
!
WARNING:
Be very careful when draining the engine oil
as it may be hot enough to burn you!
G040A02L
| Categories | Hyundai Manuals, Hyundai Santa Fe Manuals |
|---|---|
| Tags | Hyundai Santa Fe 2.4, Hyundai Santa Fe 3.5 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Santa Fe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(5 votes, average: 4.4 out of 5)
Automotive readers have rated 2003 Hyundai Santa Fe Owners Manual 4.4 out of 5.0 based on 5 product reviews. Great to have this for repair jnformation
perfect i love this manual. i require this informaiton to fix my car.
Comments are closed.