DO-IT YOURSELF MAINTENANCE
8
TIRE
23
Drive belts should be checked peri-
odically for proper tension and ad-
justed if necessary. At the same time,
belts should be examined for cracks,
wear, fraying or other evidence of
deterioration and replaced if neces-
sary.
I230A01P-GAT
PARKING
STROKE
I150A02P-GAT
Tire condition
BRAKE
LEVER
1.6
mm (0.06 in.)
Belt routing should also be checked
to be sure there is no interference
between the belts and other parts of
the engine. After a belt is replaced,
the new belt should be adjusted again
after two or three weeks to eliminate
slack resulting from initial stretching
after use.
Wear indicator
I090A01A
D030A01P
Check the tires for cuts, cracks and
other damage. Replace the tires if
there are deep cuts or cracks. Also
check each tire for pieces of metal or
pebbles.
The use of worn tires can be very
dangerous because of the greater
chance of skidding or hydroplaning.
The tread depth of the tires must
exceed 1.6 mm (0.06 in.) in order for
the tires to meet the minimum re-
quirement for use.
Pull the parking brake lever all the
way up to check the number of "clicks"
that the ratchet makes. One click
represents a lever movement of one
notch. The lever should move the
specified number of notches for nor-
mal brake application.
NOTE:
The drive belt tension for diesel
engine (2.5 CRDi only) is adjusted
automatically.
Parking brake lever stroke;
If the parking brake lever stroke is not
within the standard range(5 to 7
notches), have the brake lever ad-
justed at an authorized HYUNDAI
dealer.
If there are belt-line wear indicators
on the tires, they will appear in six
places on the surface of the tire
thereby indicating that the tire no
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)