DO-IT-YOURSELFMAINTENANCE
6
17
G110B04A-AAT
Recommended Fluid
G110D02Y-AAT
To Check the Transaxle Fluid
Level
1. Open the hood, being careful to
keep hands, long hair and clothing
clear of any moving parts.
Your Hyundai automatic transaxle is
specially designed to operate with
Hyundai Genuine ATF SP-III, DIA-
MOND ATF SP-III, SK ATF SP-III or
other brands approved by Hyundai
Motor Co., Damage caused by a
nonspecified fluid is not covered by
your new vehicle limited warranty.
Park the car on level ground with the
parking brake engaged. When the
transaxle fluid level is checked, the
transaxle fluid should be at normal
operating temperature and the en-
gine idling.
1.6/2.0L
2.7L
G110C03Y-GAT
Transaxle Fluid Capacity
HGK5007
The fluid capacity of the automatic
transaxle is 7.8 liters (8.2 U.S. quarts).
2.
Remove the transaxle dipstick, wipe
it clean, reinsert the dipstick as far
as it will go, then remove it again.
Now check the fluid level on the
dipstick. It should be in the "HOT"
range on the dipstick.
!
WARNING:
The transaxle fluid level should be
checked when the engine is at
normal operating temperature. This
means that the engine, radiator,
radiator hose, exhaust system etc.,
are very hot. Exercise great care
not to burn yourself during this
procedure.
HGK3025
While the engine is idling, apply the
brakes and move the gear selector
lever from "P" to each of its other
positions — "R", "N", "D" — and then
return to "N" or "P". With the engine
still idling:
3. If the transaxle fluid level is low,
use a funnel to add transaxle fluid
through the dipstick tube until the
level reaches the "HOT" range. Do
not overfill.
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)