DO-IT-YOURSELFMAINTENANCE
6
REPLACEMENT OF LIGHT
BULBS
31
G290B01GK-GAT
Adjustment After Headlight As-
sembly Replacement
SPECIFICATION:
"H"
Horizontal center line of headlights
from ground:
Low Beam: 679mm (26.7 in.)
High Beam: 672mm (26.5 in.)
G260A02A-AAT
Before attempting to replace a light
bulb, be sure the switch is turned to
the "OFF" position.
The next paragraph shows how to
reach the light bulbs so they may be
changed. Be sure to replace the
burned-out bulb with one of the same
number and wattage rating.
Vertical line
30mm
(1.18 in.)
Horizontal line
W
"P"
H
"W"
Distance between each headlight cen-
ter :
Low Beam: 1,202mm (47.3 in.)
High Beam: 966mm (38.0 in.)
Cut-off line
See page 6-39 for the wattage descrip-
tion.
Ground
line
L
H
"L"
G290B01HR-1
!
Distance between the headlights and
the wall that the lights are tested
against : 3,000 mm (118 in.)
CAUTION:
If the vehicle has had front body
repair and the headlight assembly
has been replaced, the headlight aim-
ing should be checked using an aim-
ing screen as shown in the illustra-
tion. Turn on the headlight switch.
Keep the lamps out of contact with
petroleum products, such as oil,
gasoline, etc.
1.
Adjust headlights so that main axis
of light is parallel to center line of
the body and is aligned with point
"P" shown in the illustration.
2.
Dotted lines in the illustration show
the center of headlights.
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)