1987 Land Rover 2.5 Litre Turbo-charged Diesel Engine Workshop Bulletin

MAINTENANCE
21.
22.
Connect  the  boost control  pipe.
Fit  the   inlet  manifold    to  turbo   charger   hose  and
secure  with the  clips.
Connect    the   air  intake   hose   and  secure   with  the
clip.
CAUTION:  Use  only   the  threaded  rod-end   to  make
adjustments.  Forcing  the  complete  rod  in  or out  will
change the  calibration with the  possibility  of damaging
engine boost.
'
23.
24.
25.
26.
27.
Fit the  heat  shield.
Fit the  bonnet.
Re-check  the  boost  pressure.
If the  boost  pressure   is still not  satisfactory,  change
the  actuator.
8.  Screw the  rod  end  in either   direction   until
end  eye  will  locate  easily  over  the  wastegate  lever
pin and  secure with  the  retaining  clip.
rod
9.
the  pressure   and  tighten
rod  end  luck
nut.
STATIC CALIBRATION OF ACTUATOR
1
.  Mount  a  dial  test  indicator   so that  the  stylus  rests
on the  end of the  actuator  rod.
2.
Pressurise    the   actuator     until    the    lever   moves
RENEW TURBO-CHARGER  ACTUATOR
Remove  the  heat  shield.
At   this   point
pressure
should  be 11.5
1.
3.
If the  pressure   is higher,   slacken  the  lock  nut  and
lengthen  the  actuator   rod.  Should   the  pressure  be
rod.
When  the  correct  pressure   is  achieved,   tighten  the
rod end  lock nut.
2
.  Remove   the actuator   hose.
3.
Remove    the    two   screws   securing
actuator
lower,  shorten
bracket  to  the turbo -charger.
4.
Remove   the  clip  retaining   the  actuator   rod  to  the
wastegate   lever pin  and withdraw  the  actuator   from
the  engine.
5
.  Fit  the replacement    actuator  with  the
single  nut and  bolt.  Tighten  the  bolts to  12.5 to 14.0
to 124 ins
bolts  and
(111
6.
Check  the boost  pressure  on  the  road  as previously
described.
6.
Push  the  wastegate   lever  as far  as possible  towards
actuator   and apply  pressure   to keep  the lever  in
this position.
7.
Pressurise  the  actuator   to 57 to 62cm
and  hold this  pressure.
to 12
IN
ANI)
Product Specification
CategoriesLand Rover
Tags
Model Year1987
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 6 pages
Document TypeWorkshop Bulletin
LanguageEnglish
Product Name2.5 Litre Turbo-charged Diesel Engine
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field