How to Add Fluid
Refer to the Maintenance Schedule to determine what
kind of transmission fluid to use. See “Recommended
Fluids and Lubricants” in the Index.
Add fluid only after checking the transmission fluid
while it is hot. (A cold check is used only as a
reference.) If the fluid level is low, add only enough of
the proper fluid to bring the level up to the HOT area for
a hot check. It doesn’t take much fluid, generally less
than one pint (0.5 L). Don’t overfill.
3.
4.
Check both sides of the dipstick, and read the lower
level. The fluid level must be in the COLD area,
below the cross-hatched area, for a cold check or in
the HOT area or cross-hatched area for a hot check.
NOTICE:
We recommend you use only fluid labeled
If the fluid level is in the acceptable range, push the
dipstick back in all the way; then flip the handle
down to lock the dipstick in place.
DEXRON -III, because fluid with that label is
made especially for your automatic transmission.
Damage caused by fluid other than DEXRON -III
is not covered by your new vehicle warranty.
After adding fluid, recheck the fluid level as
described under “How to Check.”
When the correct fluid level is obtained, push the
dipstick back in all the way; then flip the handle
down to lock the dipstick in place.
6-22
Product Specification
Categories | Chevrolet Manuals, Chevrolet S10 Manuals |
---|---|
Document Type | Free Auto PDF Owners Manual Download |
Tags | Chevrolet S10 4.3 |
Model Year | 2000 |
Download File |
|
Document File Type | |
Publisher | chevrolet.com |
Wikipedia's Page | Chevrolet S-10 |
Copyright | Attribution Non-commercial |
Glad I did not have to pay for manual
So, another good reason to keep on top of pressures. Since an average dealership sale lasts a mere 5 days, it’s imperative that a
dealership’s direct mail gets into consumers’ homes as quickly as possible.
I typically come up with some fairly wild ideas for my cars and Troy by no means says no.