Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Towing
258
To be certain to avoid additional damage to the vehicle
powertrain, however you should do the following:
Caution!
If the vehicle is towed with the front axle raised, the
engine must be shut off (key in steering lock position 1).
Otherwise, the 4-ETS+ may become engaged which may
cause loss of towing control. Switch off the tow-away
alarm (see page 36) as well as the ESP (see page 207).
•
•
•
With damage to front axle, raise front axle. Remove
flexible drive shaft between rear axle and transfer
case
With damage to rear axle, raise rear axle and tow
vehicle with wheel lift or dolly placed under front
wheels.
Warning!
With the engine not running, there is no power
assistance for the braking and steering systems. In
this case, it is important to keep in mind that a
considerably higher degree of effort is necessary to
brake and steer the vehicle.
With damage to transfer case, remove flexible drive
shafts to the drive axles.
Note:
Always install new self-locking nuts when reinstalling
the flexible drive shaft.
Note:
To signal turns while being towed with hazard warning
flasher in use, turn key in steering lock to position 2
and activate combination switch for left or right turn
signal in usual manner. Now deactivate the hazard
warning flasher, only the selected turn signal will
operate. Upon canceling the turn signal, the hazard
warning flasher must be activated again.
Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz ML320, Mercedes-Benz ML430, Mercedes-Benz ML55 AMG, Mercedes-Benz W163 |
Model Year | 2000 |
Download File |
|
Document File Type | |
Publisher | mbusa.com |
Wikipedia's Page | Mercedes-Benz W163 |
Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4) Automotive readers have rated 2000 Mercedes-Benz M-Class Operators Manual ML320 ML430 ML55 AMG 4.0 out of 4.0 based on 1 product reviews.
Great service