Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Garage door opener
172
Programming or reprogramming the integrated
remote control:
4. The indicator lamp on the integrated remote control
will flash, first slowly and then rapidly. When the
indicator lamp flashes rapidly, both buttons may be
released (the rapid flashing lamp indicates
successful programming of the new frequency
signal). To program the remaining two buttons,
follow steps 1 through 4.
1.
2.
Turn electronic key in steering lock to position 1
or 2.
Hold the end of the hand-held transmitter of the
device you wish to train approximately 2 to 5 inches
(5
integrated remote control located on the inside rear
view mirror, keeping the indicator lamp in view.
cm to 12 cm) away from the surface of the
Note:
If, after repeated attempts, you do not successfully
program the integrated remote control device to learn
the signal of the hand-held transmitter, the garage door
opener could be equipped with the “rolling code
feature”.
3.
Using both hands, simultaneously push the hand-
held transmitter button and the desired integrated
remote control button. Do not release the buttons
until completing step 4.
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz E320, Mercedes-Benz E430, Mercedes-Benz E55 AMG, Mercedes-Benz W211 |
| Model Year | 2002 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.