LocksandSecurity
You may also perform the following power door lock sequence to
enable/disable the perimeter lamps feature:
1. Turn the ignition to ON, then press the power door unlock control 3
times.
2. Turn the ignition to OFF, then press the power door unlock control 3
times.
3.
Turn the ignition to ON, and within five seconds press the power door
unlock control 2 times.Note: You will receive two horn chirps to
indicate that the system has been altered successfully.
4.
Turn the ignition to the OFF position to exit the procedure.
Note:the puddle lamps cannot be deactivated; performing this procedure
will only deactivate the head, park and tail lamps.
KEYLESSENTRYSYSTEM(IFEQUIPPED)
You can use the keyless entry
keypad to:
1 2 3 4 5 6 7 8 9 0
•
lock or unlock the doors without
using a key.
•
•
open the trunk.
activate or deactivate the autolock feature.
The keypad can be operated with the factory set 5–digit entry code; this
code is located on the owner’s wallet card in the glove box, is marked on
the computer module, and is available from your authorized dealer. You
can also create your own 5–digit personal entry code.
When pressing the controls on the keypad, press the middle of the
controls to ensure a good activation.
Programmingapersonalentrycode
To create your own personal entry code:
1.
2.
3.
Enter the factory set code.
Within five seconds press the 1• 2 on the keypad.
Enter your personal 5-digit code. Each number must be entered
within five seconds of each other.
Tips:
•
•
Do not set a code that uses five of the same number.
Do not use five numbers in sequential order.
67
| Categories | Ford Manuals, Ford Taurus Manuals |
|---|---|
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 3.75 out of 5)
Automotive readers have rated 2003 Ford Taurus Owners Manual 3.8 out of 5.0 based on 4 product reviews. J'aimerais voir comment on pose les mirroirs
This was very helpful. Thanks!
Helpful