Controls in detail
Control system
With daytime running lamp mode se-
lected and the exterior lamp switch at
position 0, the following lamps will
come on automatically when the en-
gine is turned on:
Setting locator lighting
The locator lighting switches off when the
driver’s door is opened. It switches off au-
tomatically after a period of approximately
40 seconds.
During darkness, the following lamps will
come on when the exterior lamp switch is
in position U, the locator lighting fea-
ture is activated, and the vehicle is un-
locked by remote control:
̈ Move the selection marker with
the æ or ç button to the Light-
ning submenu.
ț
Parking lamps and low beam head-
lamps
ț
ț
ț
ț
Parking lamps
Tail lamps
ț
License plate lamps (in low ambient
light conditions)
̈ Press button j or k repeatedly
until you see this message in the dis-
License plate lamps
Front fog lamps
play: Function Surround lighting
.
i
The selection marker is on the current
setting.
If you turn the exterior lamp switch to
another position, the corresponding
lamp(s) will switch on.
To activate locator lighting:
̈
Make sure the function surround light-
ing is set to on (see below).
For safety reasons, resetting the
Lighting submenu to factory settings
̈
Turn the exterior lamp switch to posi-
tion U.
(
୴ page 124) will not reset the daytime
running lamp mode.
In the display you will then see the mes-
sage: Lighting – Cannot be com-
pletely reset to factory settings
while driving.
̈
Press æ or ç to select the de-
sired setting.
The locator lighting will be switched on
or off.
130
Product Specification
Categories | Mercedes-Benz CLK-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CLK320, Mercedes-Benz CLK500, Mercedes-Benz CLK55 AMG, Mercedes-Benz W209 |
Model Year | 2003 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I believe this is the Original manual.