Controls in detail
Useful features
Rolling code programming
You have 30 seconds time to initiate the
following step.
Canadian programming
To train a garage door opener (or other roll-
ing code devices) with the rolling code fea-
ture, follow these instructions after
completing the “Programming” portion of
this text. (A second person may make the
following training procedures quicker and
easier.)
During programming, your hand-held
transmitter may automatically stop trans-
mitting.
̈ Firmly press and release the pro-
grammed integrated remote control
transmit button.
̈
Continue to press and hold the inte-
grated remote control transmitter but-
ton (refer to steps two through four in
the “Programming” portion) while you
press and re-press (“cycle”) your
hand-held transmitter every two sec-
onds until the frequency signal has
been learned.
̈
Press and release same button a sec-
ond time to complete the training pro-
cess.
̈
Locate training button on the garage
door opener motor head unit.
Some garage door openers may require
you to do this procedure a third time to
complete the training.
Exact location and color of the button
may vary by garage door opener brand.
If there is difficulty locating the trans-
mitting button, refer to garage door
opener operator’s manual.
̈
Confirm the garage door operation by
pressing the programmed button on
the integrated remote control transmit-
ter.
Upon successful training, the indicator
lamp will flash slowly and then rapidly
after several seconds.
̈
Press “training” button on the garage
door opener motor head unit.
The “training light” is activated.
237
Product Specification
Categories | Mercedes-Benz CLK-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz CLK320, Mercedes-Benz CLK500, Mercedes-Benz CLK55 AMG, Mercedes-Benz W209 |
Model Year | 2003 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I believe this is the Original manual.