Practical hints
Flat tire
always vertical (plumb line) when in use, es-
pecially on hills. Always try to use the jack
on level surface. Be sure that the jack arm is
fully seated in the jack take-up bracket. Al-
ways lower the vehicle onto sufficient ca-
pacity jackstands before working under the
vehicle.
1
2
3
Jack take-up bracket
Jack
Crank
Make sure that the foot of the jack is di-
rectly under the take-up bracket so that it
is always vertical (plumb-line) as seen from
the side, even if the vehicle is parked on an
incline
̈
Position jack 2 on firm ground under
the respective jack take-up bracket 1.
̈
Turn crank 3 until the tire is a maxi-
mum of 1.2 in (3 cm) off the ground.
Never start engine while vehicle is
raised.
̈
On wheel to be changed, loosen but do
not yet remove the wheel bolts (ap-
proximately one full turn with wrench).
The jack take-up brackets are located di-
rectly behind the front wheel housing and
in front of the rear wheel housing.
339
| Categories | Mercedes-Benz E-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz E320, Mercedes-Benz E500, Mercedes-Benz W211 |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(8 votes, average: 4.25 out of 5)
Automotive readers have rated 2003 Mercedes-Benz E-Class Operators Manual E320 E500 4.3 out of 5.0 based on 8 product reviews. Can't find book and nothing came up . Not sure on what I missed but ok.
very good
thank you very much and iam very broud and happy for easy navigation and smothly brosing through this manual
very good help me to do job to esey
lots of help.answered all my concerns
THANK YOU VERY MUCH FOR MAKING THIS EXCELLENT GRAPHICALLY INFORMATIVE E500 MANUAL AVAILABLE TO US.
mANUEL HENRIQUEZ
This is ok