150n
Coolant
Do not add coolant to the cooling
system when the engine is hot.
Escaping coolant can cause burns.<
4. If the coolant is low, slowly add cool-
ant up to the specified level – do not
overfill
5.
Twist closed the cap and tighten
firmly
Coolant consists of water and coolant
additive. Not all commercially available
additives are suitable for your BMW.
Ask your BMW Sport Activity Vehicle
center for suitable additives.
6. Have the reason for the coolant loss
eliminated as soon as possible.
Only use suitable additives, as
otherwise engine damage may
result. The additives present a health
hazard.<
Checking coolant level
1.
The engine must be at ambient tem-
perature
Always observe all applicable
environmental rules and regula-
tions when disposing of used coolant
additives.<
2.
Start by turning the cap of the expan-
sion tank counter-clockwise. Pause
to allow any accumulated pressure to
escape, then open
3.
The coolant level is correct when the
end of the red float is aligned with
the upper edge of the filler opening,
refer to the arrow in the illustration,
or max. 0.8 in/2 cm higher, i. e. up to
the mark on the float, refer also to the
schematic diagram, next to the cap
Online Edition for Part No. 01 41 0 158 286 - �04/04 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals |
|---|---|
| Tags | BMW E53, BMW X5 3.0i, BMW X5 4.4i, BMW X5 4.8is |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.5 out of 5)
Automotive readers have rated 2004 BMW X5 3.0i 4.4i 4.8is E53 Owners Manual 4.5 out of 5.0 based on 4 product reviews. this article is so important for x5 owners, thanks for it
very good and very helpful
thank you
lost book.. this is a great service
I own a 2004 BMW X5 4. 4 and the ccv vent valves keep popping off causing the engine to burn oil and grey smoke to become out tge tail pipe.