DO-IT-YOURSELFMAINTENANCE6
25
5
6.
. Open the hood.
G290B03E-AAT
Adjustment After Headlight Assembly
Replacement
SPECIFICATION:
Draw the vertical line (through the center of
each headlight beam pattern) and the hori-
zontal line (through the center of each head-
light beam pattern) on the aiming screen.
"H"
Horizontal center line of headlights from
ground.
Low beam : 25.2 in. (639 mm)
High beam : 23.3 in. (619 mm)
1.18
in. (30mm) Vertical line
Horizontal line
W
And then, draw the horizontal parallel line at
0.8
in. (21 mm) under the horizontal line.
"P"
"W"
7
. Adjusteachcut-offlineofthelowbeamtothe
parallel line with a phillips screwdriver
Distance between each headlight center.
Low beam : 44.2 in. (1124 mm)
High beam : 33.0 in. (840 mm)
H
Cut-off line
-
VERTICAL AIMING
L
Ground
line
"L"
!
Distance between the headlights and the
wall that the lights are tested against.
: 118 in. (3,000 mm).
H
WARNING:
Horizontal aiming should be adjusted by an
authorized Hyundai Dealer.
G290B01A-1
If the vehicle has had front body repair and the
headlight assembly has been replaced, the
headlight aiming should be checked using an
aiming screen as shown in the illustration. Turn
on the headlight switch. (Low Beam Position)
1.
2.
Adjust headlights so that main axis of light is
parallel to center line of the body and is
alignedwithpoint"P"shownintheillustration.
Dottedlinesintheillustrationshowthecenter
of headlights.
| Categories | Hyundai Elantra Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai Elantra 2.0 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 2 out of 3)
Automotive readers have rated 2004 Hyundai Elantra Owners Manual 2.0 out of 3.0 based on 2 product reviews. I bought this used and the battery isn't completely dead but it won't start and my key won't work in the trunk to get to the spare tire, because I also have a flat.
good review