Land Rover HomeLink®
4.
5.
Using both hands, push the hand-held
transmitter button and the desired button
on the HomeLink® Transmitter. Continue
to press both buttons through step 5.
Hold down both buttons until you see the
amber light on the Land Rover HomeLink®
Transmitter flash, first slowly and then
rapidly. It indicates that you have
successfully programmed the HomeLink®
Transmitter to learn the new frequency
signal. Release both buttons once the
rapid flashing begins.
Training a garage door opener equipped with
‘rolling codes’
To train your ’rolling code’ garage door opener
to operate from your HomeLink® Transmitter,
follow these steps:
1.
Program your hand-held transmitter to the
HomeLink® Transmitter by following the
procedures outlined in ‘Programming’,
page 107 (if you already completed this
programming, proceed to the next
instruction).
Train your garage door opener receiver to
recognize your HomeLink® Transmitter:
2.
Operating the Land Rover HomeLink®
Transmitter
Once it is programmed, the HomeLink®
Transmitter can be used in place of your
hand-held transmitter(s). To operate, simply
press the appropriate button on the HomeLink®
(your garage door opener receiver will
learn to recognize the HomeLink®
Transmitter by following the same
process used to train the hand-held
transmitter)
a) Remove the cover panel from your
garage door opener receiver (the receiver
should be located by the garage door
motor).
b) Locate the training button on the garage
door opener receiver. The exact location
and color of the button may vary by garage
door opener brand. If you have difficulty
locating the training button, reference
your garage door opener manual, or call
1-800-355-3515.
c) Press the training button on the garage
door opener receiver for 1-2 seconds.
d) Return to the HomeLink® Transmitter
Transmitter. The amber light comes on while
the signal is being transmitted.
NOTE: If your hand-held transmitter appears to
program the HomeLink® Transmitter, but does
not open your garage door and, if your garage
door was manufactured after 1995, your garage
door opener may have a ‘code protected’ or
‘rolling code’ feature.
A ‘rolling code’ type of system will change the
‘code’ of your garage door opener every time
you open or close your garage door.
To determine if you have one of these systems,
depress the button on your HomeLink®
Transmitter that you programmed. If the amber
light on the HomeLink® Transmitter flashes
rapidly for 1-2 seconds, then turns solid, your
garage door opener has a rolling code system.
in the vehicle and depress the
programmed HomeLink® Transmitter
button for the duration of the rapid flash of
the HomeLink®’ amber light, (1-2
seconds). Release the button and depress
the button to confirm that the HomeLink®
Transmitter has been trained to the
receiver.
108
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 2004 |
| Download File |
|
| Language | Bulgarian, English |
| Product Name | Discovery Handbook |
| Product Brand | Land Rover |
| Applicable to Country | International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)