Towing
Trailer hitch
•
•
Check the operation of trailer brakes and
lights.
8
inch ( 203 mm )
For maximum stability, ensure that loads
are properly secured and unable to shift
position during transit. Also, position loads
so that most of the weight is placed close to
the floor and, where possible, immediately
above or close to the trailer axle(s).
3
inch ( 76 mm )
•
After loading the trailer, check that the
weight on the hitch point (this is called the
tongue weight, or nose weight), is in
accordance with both the trailer
H2651
manufacturer's recommendations, and the
requirements in this Manual, (see ‘Tongue
weight’, page 149).
Your vehicle is equipped with a Class III trailer
hitch receiver as standard equipment. When
selecting a drawbar for the receiver, do not
exceed a drop in height of 3 in (76 mm) or a
hitch length of 8 in (203 mm) - both as
measured from the connecting pin of the
receiver.
•
•
When calculating the laden weight of the
trailer, remember to include the weight of
the trailer PLUS THE LOAD.
Where the load weight can be divided
between trailer and tow vehicle, loading
more weight into the vehicle will generally
improve the stability of the combination.
An equalizing or other form of weight
distributing hitch should NOT be used with your
vehicle.
NOTE: It is the driver's responsibility to ensure
that all regulations with regard to towing are
complied with according to the state in which
the vehicle is being operated. All relevant
information should be obtained from an
appropriate motoring organization or towing
equipment retailer.
NOTE: Users of light trailers with loads not
exceeding 5511 lb (2500 kg) and a tongue
weight limited to 400 lb (180 kg), may opt for a
drawbar with a drop height not exceeding 5 in
(127
mm).
Towing guidelines
When preparing your vehicle for towing, pay
careful attention to the trailer manufacturer's
recommendations and observe the following
guidelines:
NOTE: When towing trailers, always consult
and obey local speed regulations. Speed should
be reduced to compensate for increased
stopping distances.
•
Ensure that the towing vehicle tire pressures
are correct and that the trailer tire pressures
are as recommended by the trailer
manufacturer.
•
Within the limits quoted, choose a draw bar
that allows for a level attitude of the trailer
and vehicle.
147
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 2004 |
| Download File |
|
| Language | Bulgarian, English |
| Product Name | Discovery Handbook |
| Product Brand | Land Rover |
| Applicable to Country | International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)