Controls in detail
Transfer case
Switching from HIGH to LOW
Switching from LOW to HIGH
Messages in the multifunction display
If a shift was not completed and the multi-
function display shows one of the following
messages:
!
The shift procedure can only be per-
formed when:
!
The shift procedure can only be per-
formed when:
ț TC SHIFT CONDITIONS NOT FULFILLED
ț
ț
The engine is running.
ț
ț
The engine is running.
The shift did not take place. At least
one shift condition was not met.
The gear selector lever for the auto-
matic transmission is in position N.
The gear selector lever for the auto-
matic transmission is in position N.
̈
Repeat the shift procedure.
ț
ț
The vehicle is not at standstill.
ț
ț
The vehicle is not at standstill.
ț TC IN NEUTRAL
The vehicle speed does not exceed
The vehicle speed does not exceed
40 mph (70 km/h).
25 mph (40 km/h).
The shift did not take place. The trans-
fer case is in neutral. The gear
positionN is displayed in the transfer
case indicator 1.
̈
Press upper half (“LOW”) of the trans-
fer case switch.
̈ Press lower half (“HIGH”) of the trans-
fer case switch.
̈ Repeat the shift procedure.
Once the shift is complete, gear
positionL is displayed in the transfer
case indicator.
Once the shift is complete, gear
positionH is displayed in the transfer
case indicator.
Warning!
G
i
i
If TC is in neutral, transmission position P
will not hold vehicle. The parking brake must
be applied to hold vehicle in place.
If the shift procedure does not take
place press upper half (“LOW”) of the
transfer case switch again.
If the shift procedure does not take
place press lower half (“HIGH”) of the
transfer case switch again.
̈
Put gear selector in D.
̈ Put gear selector in D.
146
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)