Controls in detail
Seats
Removing and installing front seat
head restraints
i
Installing front seat head restraint
Tilt the seat backrest rearward for eas-
ier removal and installation of the head
restraints.
Press switch 1 upwards and hold for
̈
about five seconds.
For more information on head restraint ad-
justment, see the “Getting started” section
̈ Press the head restraint down until it
(
୴ page 36).
engages.
Front seat head restraints
̈
Adjust head restraint to the desired po-
sition.
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Synchronizing head restraints and seat
adjustment fore and aft for front seats
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
If the power supply was interrupted (bat-
tery disconnected or discharged), the head
restraints and the seat adjustment fore
and aft are no longer adjusted automatical-
ly.
1
Switch
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
The head restraints and the seat adjust-
ment fore and aft must be resynchronized:
Removing front seat head restraint
Turn SmartKey in starter switch to
̈
Press switch 1 upwards and hold until
̈
the head restraint is fully extended.
position 2.
Do not interchange head restraints from
front and rear seat.
Move the seat completely forward
̈
Pull head restraint out.
̈
(
୴ page 35) and the head restraint fully
down (୴ page 36) and hold the switch-
es for approximately one second.
95
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)