Operation
Engine compartment
Checking engine oil level with the
control system
ENGINE OIL LEVEL
MEASURING NOW
i
If you want to interrupt the checking
procedure, press the k or j
button on the multifunction steering
wheel.
When checking the oil level the vehicle
must
ț
ț
ț
be parked on level ground
be at normal operating temperature
̈
If necessary, add engine oil.
have been stationary for at least five
minutes with the engine turned off
For adding engine oil see (୴ page 231).
One of the following messages will
subsequently appear in the indicator:
For more information on engine oil, see the
“Technical data” section (୴ page 333) and
୴ page 334).
To check the engine oil level via the
multifunction display, do the following:
ț ENGINE OIL LEVEL
OK
(
̈
Turn the SmartKey in the starter switch
ț ADD 1.0 Qt. TO
REACH MAX. OIL LEVEL!
Other display messages
to position 2.
If the SmartKey is not turned to position 2
in the starter switch, the following
message will appear:
The standard display (୴ page 115) should
appear in the multifunction display.
(Canada: 1.0 LITER)
Press button k or j on the
steering wheel until the following
message is seen in the multifunction
display:
ț ADD 1.5 Qts. TO
REACH MAX. OIL LEVEL!
̈
FOR ENGINE OIL LEVEL
SWITCH ON IGNITION!
(Canada: 1.5 LITERS)
̈
Switch on the ignition.
ț ADD 2.0 Qts. TO
REACH MAX. OIL LEVEL!
MEASURE. CORRECT
ONLY IF VEH. LEVEL
If you see the message:
(Canada: 2.0 LITERS)
OBSERVE WAITING PERIOD
After about three seconds this
message is displayed:
229
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)