1.
Insert screwdriver into the slot and press to
the right, refer to arrows. This releases the
lamp.
guardrail.
If a warning triangle or portable hazard warning
lamp is required, set it up on the roadside at an
appropriate distance from the rear of the vehi-
cle. Comply with all safety guidelines and regu-
lations.
Change the wheel only on a level, firm surface
which is not slippery. The vehicle or the jack
could slip to the side if you attempt to raise the
vehicle on a soft or slippery surface such as
snow, ice, tiles, etc.
Position the jack on a firm support surface.
Do not use a wooden block or similar object as a
support base for the jack, as this would prevent
it from extending to its full support height and
reduce its load-carrying capacity.
2.
Remove the lamp and replace the bulb.
Backup lamps
To avoid serious or fatal injury: never lie under
the vehicle, and never start the engine while it is
supported by the jack.<
In the event of a malfunction, please go to your
BMW center or a workshop that works accord-
ing to BMW repair procedures with correspond-
ingly trained personnel.
What you will need
LEDs light-emitting diodes
To avoid rattling noises later on, note the posi-
tions of the tools before removing them, then
return them to their initial positions after com-
pleting work.
Light-emitting diodes installed behind translu-
cent lenses serve as the light source for many of
the controls and displays in your vehicle. These
light-emitting diodes, which operate using a
concept similar to that applied in conventional
lasers, are officially designated as Class 1 light-
emitting diodes.
Do not remove the covers, and never
stare directly into the unfiltered light for
several hours, as this could result in irritation of
the retina.<
1
2
3
Chock*
Changing wheels
Vehicle jack*
Lug wrench*
Safety precautions in the event of a flat
tire or wheel change: Park the vehicle as
far as possible from passing traffic and on solid
ground. Switch on the hazard warning flashers.
Lock the steering wheel in straight-ahead set-
ting of the wheels. Apply the handbrake and
engage first gear, reverse gear or selector lever
position P.
The tools are located in the hollow of the com-
pact wheel.
1.
Lift up floor mat or floor panel flap and cover
located beneath it.
2.
3.
Take out the required tools.
After using the tools, return then to the stor-
age space.
Have all vehicle occupants get out of the vehicle
and ensure that they remain outside the imme-
diate area in a safe place, such as behind a
185
Online Edition for Part-No. 01 41 0 158 518 - � 09/04 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 525i, BMW 530i, BMW 545i, BMW E60 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(6 votes, average: 4.67 out of 5)
Automotive readers have rated 2005 BMW 5-Series 525i 530i 545i E60 Owners Manual 4.7 out of 5.0 based on 6 product reviews. good business to do business with
so far good person to do business with
It's amazing and I really like it
This is impossible to use. Not surecwhat im supossed to do
Glad to have this manual online
This manual is so informative that you need to be helped to be confused!