The system requests that you
intervene by braking or with an
evasive maneuver. The display 2
flashes red and a signal sounds.
The active cruise control cannot
Desired speed, store and decrease
Pull back the lever 2:
The current driving speed is rounded off to the
next multiple of 5 mph/10 km/h, displayed and
stored.
automatically restore the distance to the vehicle
driving ahead. You will find more detailed infor-
mation on page. You will find more detailed
information on page 64.
Each time the lever is pulled back again, the
desired speed is decreased by another 5 mph/
10
30
km/h until the minimum speed of 20 mph/
km/h is reached. The speed then displayed
is stored and achieved, provided that the road is
clear.
Automatic intervention by ABS or
DSC, or you actuate the handbrake
while driving. The display 2 flashes
yellow. The active cruise control
now only intervenes by braking.
Deactivate system
Press the lever up or down while the system is
active 3. The displays in the instrument cluster
disappear. You can use the system again as
required.
Desired speed, store and increase
In addition, the system is deactivated automati-
cally:
>
>
When you apply pressure to the brake pedal
When you select the automatic transmis-
sion's/SMG's neutral position N
>
>
>
>
When the manual transmission is shifted
into neutral
When you deactivate the DSC Dynamic
Stability Control
Press the lever forward 1 at a driving speed of
more than approx. 20 mph/30 km/h:
The system applies and stores your current
speed as a desired speed. This speed is indi-
cated on the speedometer and displayed briefly
in the instrument cluster.
When you actuate the handbrake during
driving
When the system reduces the speed to
below 20 mph/30 km/h due to a traffic situ-
ation
Subsequently pressing forward increases the
desired speed to the next multiple of 5 mph/
The system deactivates automatically
when the speed is set to below 20 mph/
km/h. An acoustic signal sounds and a mes-
10
km/h. Each time the lever is pressed forward
30
sage appears on the Control Display. The active
again, the desired speed is increased by
another 5 mph/10 km/h until a maximum of
intervention of the driver is required.<
110
mph/180 km/h is reached. The speed then
displayed is stored and achieved, provided that
the road is clear.
When you switch off the ignition, the stored
desired speed is deleted.
If the display ACC --- mph/km/h briefly
appears in the instrument cluster, it might
be that conditions necessary for operation are
not currently being met.
To call up Check Control messages, refer to
page 67.<
Resume stored desired speed and
distance setting
Press button 4 when the system is deactivated.
The displays appear in the instrument cluster.
The system is reactivated and uses the last
stored desired speed and distance setting.
61
Online Edition for Part-No. 01 41 0 158 518 - � 09/04 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 525i, BMW 530i, BMW 545i, BMW E60 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(6 votes, average: 4.67 out of 5)
Automotive readers have rated 2005 BMW 5-Series 525i 530i 545i E60 Owners Manual 4.7 out of 5.0 based on 6 product reviews. good business to do business with
so far good person to do business with
It's amazing and I really like it
This is impossible to use. Not surecwhat im supossed to do
Glad to have this manual online
This manual is so informative that you need to be helped to be confused!