With run-flat tires, no tools are provided
for wheel changes. They can be pur-
chased as accessories at your BMW center.<
2.
Guide the jack head into the rectangular
recess of the jacking point when cranking
up, refer to illustration detail.
Compact wheel*
3.
Jack the vehicle up until the wheel you are
changing is raised from the ground.
1.
2.
3.
4.
Unscrew the wing nut 1.
Remove the washer 2 laterally.
Take out the tool mounts 3.
Remove the compact wheel.
Mounting a wheel
1.
Unscrew the lug bolts and remove the
wheel.
2.
Remove accumulations of mud or dirt from
the mounting surfaces of the wheel and
hub. Also clean the lug bolts.
Preparing wheel change
1.
2.
Observe the safety precautions above.
3.
Position the new wheel or compact wheel.
Secure the wheel by turning at least two lug
bolts into opposite bolt holes.
When you mount wheels other than Genu-
ine BMW light-alloy wheels, different lug
bolts may also be required.
Prevent the vehicle from rolling:
Place the chock behind the front wheel on
the other side of the vehicle, or on inclines,
in front of this wheel. On a steep grade, take
other steps to prevent the vehicle from roll-
ing.
4.
5.
Screw in the remaining lug bolts. Tighten all
the bolts securely in a diagonal pattern.
3.
Loosen the lug bolts a half turn.
Jacking up vehicle
Lower the vehicle and remove the jack from
beneath the vehicle.
1.
Position the vehicle jack at the jacking point
closest to the wheel so that the entire sur-
face of the jack base rests on the ground
perpendicularly beneath the jacking point.
After mounting
1.
Tighten the lug bolts in a diagonal pattern.
The vehicle jack is designed for
changing wheels only. Do not attempt
to raise another vehicle model with it or to
raise any load of any kind. To do so could
cause accidents and personal injury.<
To ensure safety, always have the
lug bolts checked with a calibrated
torque wrench as soon as possible to
ensure that they are tightened to the speci-
fied torque. The tightening torque is
88.5
lb ft/120 Nm.<
2.
When stowing the wheel and tools in the
vehicle, execute these steps in the reverse
order.
186
Online Edition for Part-No. 01 41 0 158 518 - � 09/04 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 525i, BMW 530i, BMW 545i, BMW E60 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(6 votes, average: 4.67 out of 5)
Automotive readers have rated 2005 BMW 5-Series 525i 530i 545i E60 Owners Manual 4.7 out of 5.0 based on 6 product reviews. good business to do business with
so far good person to do business with
It's amazing and I really like it
This is impossible to use. Not surecwhat im supossed to do
Glad to have this manual online
This manual is so informative that you need to be helped to be confused!