118n
Integrated universal remote control*
relevant system of the original hand-
held transmitter used.<
If the indicator lamp 2 on the integrated
universal remote control flashes quickly
for a brief period and then remains lit up
for approx. two seconds, this indicates
that the original hand-held transmitter is
equipped with an alternating code. In
the case of an alternating-code system,
program the memory buttons 1 as
described at the section on alternating-
code hand-held transmitters.
4.
Simultaneously press the transmit
button on the original hand-held
transmitter and the desired memory
button 1 of the integrated universal
remote control. Initially, the indicator
lamp 2 flashes slowly. Release both
buttons as soon as the indicator
lamp 2 flashes rapidly If the indicator
lamp 2 does not flash rapidly after
approx. 15 seconds, change the dis-
tance
If you have additional questions, please
consult your BMW Sports Activity Vehi-
cle center or call 1-800-355-3515.
You can also visit this website
Programming
5.
To program other original hand-held
transmitters, repeat steps 3 and 4.
1
2
Memory buttons
Indicator lamp
www.bmwusa.com <
The corresponding memory button 1 is
now programmed with the signal of the
original hand-held transmitter.
Alternating-code hand-held
transmitter
Fixed-code hand-held transmitter
1.
2.
Switch on the ignition
To program the integrated universal
remote control, consult the Owner's
Manuals for the equipment to be set.
You will find information there on the
possibilities for synchronization.
When programming alernating-code
hand-held transmitters, please observe
the following supplementary instruc-
tions:
You can operate the system when the
engine is running or when the ignition is
switched on.
For initial use: press both outer but-
tons 1 for approx. 20 seconds, main-
taining pressure until the indicator
lamp 2 starts to flash. The three
memory buttons 1 are cleared
If the system cannot be operated
after repeated programming,
3.
Hold the original hand-held transmit-
ter at a distance of approx. 2 to 8 in/
check whether the original hand-held
transmitter uses an alternating-code
system. To do so, either read the
instructions of the original hand-held
transmitter or press and hold down the
programmed memory button 1 of the
integrated universal remote control.
5
to 20 cm from the memory but-
tons 1
The required distance between
the hand-held transmitter and
memory buttons 1 depends on the
Programming will be easier with
the aid of a second person.<
Online Edition for Part No. 01 41 0 158 701 - �10/04 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals |
|---|---|
| Tags | BMW 3.0i, BMW 4.4i, BMW 4.8is, BMW E53, BMW X5 3.0i, BMW X5 Manuals |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2005 BMW X5 3.0i 4.4i 4.8is E53 Owners Manual 5.0 out of 5.0 based on 1 product reviews. How thi help me out a good thing