Starting engine
Switching off engine
65n
Do not allow the engine to warm up
by leaving it running while the vehicle
remains stationary. Instead, begin to
drive immediately at a moderate engine
speed.
Should the engine fail to start on the
first attempt, if it is very hot or cold, for
instance:
Manual transmission:
1.
Turn the ignition key to position 1
or 0.
>
Press the accelerator pedal halfway
down while engaging the starter.
2. Shift into first gear or reverse.
Automatic transmission:
X5 3.0i:
Cold starts at altitudes above 3,300 ft/
1,000 meters and at very low tempera-
tures, from approx. +57/–156:
1.
2.
Shift into selector lever position P.
Turn the ignition key to position 1
or 0.
Do not end the starting procedure
too soon, however at the latest after
approx. 20 seconds. Release the igni-
tion key immediately as soon as the
engine starts.
>
For the initial starting attempt, allow
the starter to remain engaged some-
what longer, approx. 10 seconds.
Do not remove the ignition key
when the vehicle is moving, as
otherwise the steering could lock.
When leaving the vehicle, always
remove the ignition key and lock the
steering.
Vehicles with manual transmission:
Always engage the handbrake when
parking on slopes and inclined sur-
faces. Even placing the gearshift lever
in 1st gear or reverse may not provide
adequate resistance to rolling.
X5 4.4i, 4.8is:
Your BMW is equipped with the conve-
nience starting feature. Here, it is suffi-
cient to turn the ignition key only briefly speeds at startup are normal and
to position 3 'Start engine' and to let go
of it right away. The starter actuation
continues to operate automatically for a
certain period of time and is stopped
automatically as soon as the engine has ing, always switch off electrical devices
started.
The automatic starting mode will not
operate or will be canceled if the bat-
tery voltage is insufficient. The engine
can be jump started, refer to page 171.
Engine idle speed is controlled by the
engine computer system. Increased
should decrease as the engine warms
up. If engine speed does not decrease,
service is required.
To prevent the battery from discharg-
that are not in use. Switch the ignition
off when the vehicle is not being driven.
Vehicles with automatic transmission:
Place the selector lever in Park.<
Extended starting attempts, char-
acterized by excessively frequent
or long periods with the starter
engaged, can lead to damage of the
catalytic converter.<
Vehicles with automatic transmission:
The vehicle must be stationary and the
selector lever in Park before you can
remove the ignition key.
Online Edition for Part No. 01 41 0 158 701 - �10/04 BMW AG
| Categories | BMW Manuals, BMW X5 Manuals |
|---|---|
| Tags | BMW 3.0i, BMW 4.4i, BMW 4.8is, BMW E53, BMW X5 3.0i, BMW X5 Manuals |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2005 BMW X5 3.0i 4.4i 4.8is E53 Owners Manual 5.0 out of 5.0 based on 1 product reviews. How thi help me out a good thing